VOLKSWAGEN GOLF IV
since 1997 of release
Repair and car operation
Foltsvagen Golf 4
+
1. Maintenance instruction
+
2. Engine
+
3. Cooling system
+
4. Fuel system
+
5. Exhaust system
+
6. Ventilation and heating system
+
7. Coupling
+
8. Transmission
+
9. Suspension brackets and power shafts
+
10. Steering
+
11. Wheels and tires
+
12. Brake system
+
13. Body
-
14. Electric equipment and electroschemes
14.1. Filament lamps
14.2. Electric chains
+
14.3. Detection of not closed chain
14.4. Safety locks
+
14.5. Accumulator
+
14.6. Generator
+
14.7. Starter
14.8. Replacement of bulbs of external lighting
14.9. Removal and installation of an additional signal of braking
14.10. Replacement of bulbs of internal lighting
+
14.11. Devices of external lighting
+
14.12. Adjustment of light of headlights
14.13. Removal and installation of a combination of devices
14.14. Removal and installation of switches of a steering column
14.15. Removal and installation of switches
14.16. Removal and radio receiver installation
14.17. Removal and installation of high-frequency loudspeakers
14.18. Removal and installation of low-frequency loudspeakers
14.19. Recommendations about phone installation
14.20. Aerial
14.21. Check of a heater of back glass
+
14.22. Explanations to electric circuits
+
14.23. Schemes of electric equipment of the VW Golf car since September, 1997.
14.18. Removal and installation of low-frequency loudspeakers
Removal
PERFORMANCE ORDER
1.
Remove an internal upholstery of a door.
2.
Disconnect from a loudspeaker the electric socket.
3.
Using a drill of the corresponding diameter, drill 4 rivets, fixing a loudspeaker to a door.
4.
Remove a loudspeaker and take the remains of rivets from openings at doors.
Installation
PERFORMANCE ORDER
1.
Establish a low-frequency loudspeaker on a door and fix it rivets or self-cutting screws.
2.
Connect to a loudspeaker the electric socket.
3.
Establish an internal upholstery of a door, thus do not forget to establish a sealant between a loudspeaker and a door upholstery.
home
