VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   - 13.15. Doors
      13.15.1. Removal and installation of a rack of a back door
      13.15.2. Adjustment of provision of a cover of a luggage carrier / back door.
      13.15.3. Removal and installation of the lock of a back door
      13.15.4. Removal and door installation
      13.15.5. Removal and installation of internal furnish of a door
      13.15.6. Removal and installation of the internal button of blocking of the lock of a door
      13.15.7. Removal and installation of glass of a door
      13.15.8. Removal and installation of an arm of a door
      13.15.9. Removal and installation of the external handle of opening of a door
      13.15.10. Removal and installation of the case of the cylinder of the lock
      13.15.11. Removal and installation of the lock of a door
      13.15.12. System of the central blocking of locks
      13.15.13. Removal and installation of the top upholstery of a back door
      13.15.14. Removal and installation of the bottom upholstery of a back door
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes










13.15.8. Removal and installation of an arm of a door

GENERAL INFORMATION

On an arm of a door the door lock, a window regulator and a loudspeaker fastens.

In need of window regulator replacement with an electric drive it is necessary to replace it together with an arm.

Removal

PERFORMANCE ORDER
1. The arm of a door can be removed only when glass of a door is not fixed in window regulator clamps. For this purpose lower door glass to level of technological openings in an arm and release clamps.
2. Remove an internal upholstery of a forward door.
3. Remove the case of the cylinder of the lock of a forward door.
4. Remove technological caps (1) from an arm of a forward door (2 – a bolt, shooters showed an arrangement of screws of fastening of an arm with units to a door.).
5. Lower door glass so that access to bolts of fastening of glass was possible. Weaken bolts (2) and release the clamps, fixing flew down doors.
6. Move door glass against the stop up and, using a sticky tape, fix it in this situation.
7. Disconnect all electric sockets in a forward door (arrow).
8. In an end face of a forward door unscrew two bolts (2), doors fixing the lock (1 – a bolt of fastening of the cylinder of the lock, 3 – a protective cap).
9. Unscrew the screws, fixing an arm to a forward door.
10. Separate the top part of an arm from a door, then raise an arm and, moving it the door hinge, take from a door.
11. Overturn an arm and disconnect the electric socket from the door lock.
12. From a reverse side of an arm release the brackets, fixing electric wires.

Installation

PERFORMANCE ORDER
1. In sequence, to return to removal, establish an arm at a forward door.
2. Screw in screws of fastening of an arm and tighten the moment of 8 Nanometers in a certain sequence (And – door glass, In – the screw of fastening of a clamp of glass).
3. Remove the sticky tape holding glass of a door in the top situation, move glass back to directing, fix it in clamps and tighten the screw (During) the moment of 10 Nanometers.
4. Further installation is made in sequence, return to removal.