VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   - 13.15. Doors
      13.15.1. Removal and installation of a rack of a back door
      13.15.2. Adjustment of provision of a cover of a luggage carrier / back door.
      13.15.3. Removal and installation of the lock of a back door
      13.15.4. Removal and door installation
      13.15.5. Removal and installation of internal furnish of a door
      13.15.6. Removal and installation of the internal button of blocking of the lock of a door
      13.15.7. Removal and installation of glass of a door
      13.15.8. Removal and installation of an arm of a door
      13.15.9. Removal and installation of the external handle of opening of a door
      13.15.10. Removal and installation of the case of the cylinder of the lock
      13.15.11. Removal and installation of the lock of a door
      13.15.12. System of the central blocking of locks
      13.15.13. Removal and installation of the top upholstery of a back door
      13.15.14. Removal and installation of the bottom upholstery of a back door
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes






13.15. Doors

13.15.1. Removal and installation of a rack of a back door

GENERAL INFORMATION

Elements of fastening of a back door

1–back door;
2–internal upholstery of a door;
3–emphasis;
4–rack. Before removal of a rack it is necessary to support a back door in open situation. At removal of a door it is necessary to disconnect a rack only from a back door;
5–bolt, 22 Nanometers;
6–shock plate of the lock;
7–percussion cap strut;
8–rasporny percussion cap;
9–six-sided nut, 7,2 Nanometers;
10-hinge;
11-bolt, 22 Nanometers

Rack of support of a back door

1–the spherical hinge on a door;

2–spring bracket;

3–rack;

4–bolt;

5–spherical hinge

Removal

PERFORMANCE ORDER
1. Open a back door and support it in this situation.
2. Disconnect a rack from a back door.
3. For this purpose an edge of a screw-driver raise a spring bracket (2) and remove the top part of a support from the spherical hinge on a back door (see fig. Rack of support of a back door).
4. If it is necessary to remove a rack from the car, similarly remove the lower part of a rack.
5. At removal of a rack of a back door do not take completely spring bracket from the spherical hinge, otherwise the spring bracket will be deformed and it is necessary to make rack replacement.
6. If the new pneumatic rack is established, for utilization of an old rack it is necessary to remove gas from it.
7. For this purpose fix a rack in a vice for a site X (X = 50 mm). In order to avoid accident surely clamp a rack for the specified site.
8. At the distance equal of 1/3 lengths, saw the case of a pneumatic rack. At a rack cutting for protection of eyes use points.

Installation

PERFORMANCE ORDER
Fix a pneumatic rack on a back door for what with force press a rack before fixing it on the spherical hinge of a door.