VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   - 13.15. Doors
      13.15.1. Removal and installation of a rack of a back door
      13.15.2. Adjustment of provision of a cover of a luggage carrier / back door.
      13.15.3. Removal and installation of the lock of a back door
      13.15.4. Removal and door installation
      13.15.5. Removal and installation of internal furnish of a door
      13.15.6. Removal and installation of the internal button of blocking of the lock of a door
      13.15.7. Removal and installation of glass of a door
      13.15.8. Removal and installation of an arm of a door
      13.15.9. Removal and installation of the external handle of opening of a door
      13.15.10. Removal and installation of the case of the cylinder of the lock
      13.15.11. Removal and installation of the lock of a door
      13.15.12. System of the central blocking of locks
      13.15.13. Removal and installation of the top upholstery of a back door
      13.15.14. Removal and installation of the bottom upholstery of a back door
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes



13.15.7. Removal and installation of glass of a door

GENERAL INFORMATION

Elements of fastening of glass and arm of a forward door

1–glass consolidation;
2–forward door;
3–bottom internal consolidation of glass;
4–bolt, 20 Nanometers;
5–door arm. Window regulator
is a component of an arm of a door;
6–window regulator engine;
7–bolt, 10 Nanometers;
8–cap;
9–screw, 8 Nanometers;
10-mechanical window regulator;
11-door glass

Removal

PERFORMANCE ORDER
1. Remove an internal upholstery of a door.
2. Remove the technological caps (1) closing openings in an internal part of a door (2 – a bolt).
3. Lower door glass so that access to bolts of fastening of glass opened.
4. Weaken a bolt (2) and release the clamps, fixing flew down to a window regulator.
5. Raising a back part of glass and at the same time turning it, take glass outside from a window doorway.

Installation

PERFORMANCE ORDER
1. In sequence, to return to removal, establish glass at a door and fix it on clamps. Thus clamps should settle down at level of technological openings.
2. Move glass (3) back, insert it in directing and fix a bolt (2), having tightened it the moment of 10 Nanometers (1 – the screw of fastening of an arm of a door, 4 – the screw of fastening of a clamp of glass).
3. Establish technological caps.
4. Establish an internal upholstery of a door.