VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   - 13.15. Doors
      13.15.1. Removal and installation of a rack of a back door
      13.15.2. Adjustment of provision of a cover of a luggage carrier / back door.
      13.15.3. Removal and installation of the lock of a back door
      13.15.4. Removal and door installation
      13.15.5. Removal and installation of internal furnish of a door
      13.15.6. Removal and installation of the internal button of blocking of the lock of a door
      13.15.7. Removal and installation of glass of a door
      13.15.8. Removal and installation of an arm of a door
      13.15.9. Removal and installation of the external handle of opening of a door
      13.15.10. Removal and installation of the case of the cylinder of the lock
      13.15.11. Removal and installation of the lock of a door
      13.15.12. System of the central blocking of locks
      13.15.13. Removal and installation of the top upholstery of a back door
      13.15.14. Removal and installation of the bottom upholstery of a back door
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes



13.15.3. Removal and installation of the lock of a back door

GENERAL INFORMATION

Details of the lock of a back door

1–safety bracket;
2–handle;
3–a bolt of fastening of the executive engine of the lock with the central management;
4–the executive engine of the lock with
central management;
5–draft;
6–Torx screw;
7–draft of management;
8–case of the cylinder of the lock;
9–lock;
10-a bolt with a spherical secret head, 20 Nanometers;
11-lever

Removal

PERFORMANCE ORDER
1. Remove the bottom furnish of a back door.
2. Remove from the handle draft (5), a safety bracket (1) and the case of the cylinder of the lock.
3. Disconnect the electric socket from a lamp of illumination of a luggage compartment.
4. If necessary disconnect a spring clamp of draft of management of the lock with the central management.
5. Unscrew Torx screws and remove the handle.
6. Disconnect a spring clamp of draft of a drive (7), unscrew bolts (10) and remove the lock from a back door.

Installation

PERFORMANCE ORDER
1. Put the lock and fix it bolts.
2. Supporting the lever (11), establish on it draft of management (7).
3. Further installation is made in sequence, return to removal.