VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   + 13.15. Doors
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes






13.7. Removal and installation of a rear bumper

GENERAL INFORMATION

Rear bumper

1–bumper;
2–bolt of 4 pieces, 20 Nanometers;
3–buffer beam;
4–screws of 6 pieces, 1,2 Nanometers;
5–fastening plate;
6–screws of 8 pieces, 1,2 Nanometers;
7–the directing;
8–nuts of 12 pieces;
9–a bracket with a nut of 6 pieces;
10-rasporny clip of 2 pieces;
11-bolt of 4 pieces, 15 Nanometers;
12-amortization slip;
13-spoiler;
14-screws of 6 pieces, 1,2 Nanometers

Removal

PERFORMANCE ORDER
1. Unscrew screws of fastening of lateral parts of a bumper about wheel arches.
2. Remove back lamps.
3. Disconnect the electric socket from a lamp of illumination of registration plate. The electric socket is located under the left back lamp.
4. Unscrew screws of fastening of a rear bumper (11).
5. Having pulled back, remove a bumper from directing arms.

Installation

Installation is made in sequence, return to removal.