VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   + 13.15. Doors
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes






13.5. Forward panel of a body

GENERAL INFORMATION

Elements of fastening of the forward panel of a body

1–a forward cross-piece with
constructive details;
2–bolts of 2 pieces, 8 Nanometers;
3–cable of opening of the lock of a cowl;
4–the channel in the lateral panel;
5–radiator and condenser;
6–bolts of 4 pieces, 8 Nanometers;
7–bumper beam;
8–bolts of 4 pieces, 50 Nanometers;
9–special tool 3411. In the absence of the special tool it is possible to use a bolt of M of 8х160 mm. Under a head of a bolt it is necessary to establish a washer in diameter of 35 mm

Installation of the forward cross-section panel in service situation

PERFORMANCE ORDER
1. Remove a front bumper.
2. Disconnect a cable of the lock of opening of a cowl from the cowl lock.
3. From the right and left side of the forward panel unscrew two bolts (8) and instead of bolts screw in the VW-3411 tool.
4. Unscrew the bolts, a fixing top and forward part of the forward panel.
5. Move the forward panel forward on the special VW-3411 tool.

Removal of a forward cross-piece

PERFORMANCE ORDER
1. Disconnect a cable of the lock of opening of a cowl from the cowl lock.
2. Disconnect the electric socket.
3. Disconnect electric sockets from headlights.
4. Remove a front bumper.
5. At existence disconnect a hose of a washer of headlights from T-shaped............
6. Unscrew a radiator and the condenser from a forward cross-piece and, using a soft wire, fix them on the engine.

Prevention

Do not bend condenser pipelines.


7. Remove a forward cross-piece.

Installation

PERFORMANCE ORDER
1. Establish a forward cross-piece.
2. Adjust the provision of a forward cross-piece in relation to wings of the car and fix a forward cross-piece bolts, having tightened them the demanded moment.
3. Establish a radiator and the condenser and fix them bolts.
4. Establish a front bumper and connect a hose to a washer of headlights.
5. Connect a cable of the lock of opening of a cowl.
6. Connect electric sockets.