VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   - 13.15. Doors
      13.15.1. Removal and installation of a rack of a back door
      13.15.2. Adjustment of provision of a cover of a luggage carrier / back door.
      13.15.3. Removal and installation of the lock of a back door
      13.15.4. Removal and door installation
      13.15.5. Removal and installation of internal furnish of a door
      13.15.6. Removal and installation of the internal button of blocking of the lock of a door
      13.15.7. Removal and installation of glass of a door
      13.15.8. Removal and installation of an arm of a door
      13.15.9. Removal and installation of the external handle of opening of a door
      13.15.10. Removal and installation of the case of the cylinder of the lock
      13.15.11. Removal and installation of the lock of a door
      13.15.12. System of the central blocking of locks
      13.15.13. Removal and installation of the top upholstery of a back door
      13.15.14. Removal and installation of the bottom upholstery of a back door
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes





13.15.11. Removal and installation of the lock of a door

GENERAL INFORMATION

The door lock, window regulator and loudspeaker fasten on one arm of a door.

Removal of the lock of a door can be made only together with an arm.

Removal

PERFORMANCE ORDER
1. Removal of an arm of a door can be made only after release of glass of a door from window regulator clamps. For this purpose lower door glass to level of technological openings in an arm and release clamps.
2. If at doors window regulators with an electric drive are established and they for any reason do not work at present, to lower glass of a door it is possible manually.
3. Remove an upholstery of a forward door.
4. Remove the case of the cylinder of the lock.
5. Release a clamp of the external handle of opening of a door.
6. Remove an arm with units from a forward door.
7. Using дорн, release clamps (1) fastening of the lock of a door.
8. Using a screw-driver (3), separate from a door arm the lock of a door (4) with a transitional angular arm (1 – a bracket, 2 – a cable).
9. Take from the door lock safety draft (1) for what turn the door lock in the arrow direction (2 – hummock draft).
10. Release fastening of a cover of hummock bent for to the door lock.
11. Turn a tip of hummock draft on 90 ° and take it from an opening in the lever of the lock of a door.

Installation

PERFORMANCE ORDER
1. In the direction of an arrow move the lock lever (1 – the lever, 2 – a spring, 3 – a screw-driver).
2. Using an edge of a screw-driver (3), hang a spring (2) on the door lock, moving it in the directions shown by shooters.
3. Further installation is made in sequence, return to removal.
4. Check operation of the lock of a door.