VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation


Foltsvagen Golf 4
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. Petrol engines
      2.1.1. Technical characteristics
      2.1.2. Removal and installation of the bottom mudguard of a motor compartment
      + 2.1.3. Engine 1,6-/1,8-I
      + 2.1.4. Engine 1,4-I
      + 2.1.5. The engine 2,3 - I-VR5
      2.1.6. Compression check in engine cylinders
      - 2.1.7. Removal and installation of a poliklinovy belt
         - 2.1.7.1. Engines 1,6-/1,8-I
            2.1.7.1.1. Removal
            2.1.7.1.2. Installation
         + 2.1.7.2. Engine 1,4-I
         + 2.1.7.3. Engine 2,3-I
      + 2.1.8. Recommendations about engine oils
      + 2.1.9. Circulation of engine oil
      2.1.10. Check of pressure of oil and sensor of pressure of oil
      2.1.11. Removal and installation of the oil pallet
      2.1.12. Engine start after major maintenance
      2.1.13. Diagnostics of malfunctions of the engine
      2.1.14. Main malfunctions of system of greasing
   + 2.2. Diesel engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes





2.1.7.1.2. Installation
PERFORMANCE ORDER
1. Establish poliklinovy a belt on engine pulleys. At repeated installation of a belt establish it according to earlier put shooters.
2. A wrench turn the mechanism of a tension of a poliklinovy belt counter-clockwise and take дорн or the shaft of a drill fixing the mechanism of a tension.
3. Release a wrench therefore the mechanism of a tension will make an automatic tension of a poliklinovy belt.
4. Start the engine and check belt work.