VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. Petrol engines
      2.1.1. Technical characteristics
      2.1.2. Removal and installation of the bottom mudguard of a motor compartment
      + 2.1.3. Engine 1,6-/1,8-I
      + 2.1.4. Engine 1,4-I
      + 2.1.5. The engine 2,3 - I-VR5
      2.1.6. Compression check in engine cylinders
      - 2.1.7. Removal and installation of a poliklinovy belt
         + 2.1.7.1. Engines 1,6-/1,8-I
         - 2.1.7.2. Engine 1,4-I
            2.1.7.2.1. Removal
            2.1.7.2.2. Installation
         + 2.1.7.3. Engine 2,3-I
      + 2.1.8. Recommendations about engine oils
      + 2.1.9. Circulation of engine oil
      2.1.10. Check of pressure of oil and sensor of pressure of oil
      2.1.11. Removal and installation of the oil pallet
      2.1.12. Engine start after major maintenance
      2.1.13. Diagnostics of malfunctions of the engine
      2.1.14. Main malfunctions of system of greasing
   + 2.2. Diesel engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes







петли для функционального тренинга, эксклюзивный дистрибьютор.



2.1.7.2. Engine 1,4-I

2.1.7.2.1. Removal

GENERAL INFORMATION

Arrangement of a poliklinovy belt on models without air central air



1–cranked shaft;
2–tension roller;
3–generator;
4–Poliklinovy belt;
5–сервонасос

Arrangement of a poliklinovy belt on models with air central air (a bilateral ridge belt)


1–сервонасос;

2–a directing roller;

3–generator;

4–conditioner compressor;

5–cranked shaft;

6–tension roller

Removal

PERFORMANCE ORDER
1. Remove the bottom mudguard of a motor compartment.
2. If the belt is repeatedly established, using a marker or paint, note the direction of rotation of a belt.
3. Weaken a tension and remove poliklinovy a belt. For weakening of a tension of a poliklinovy belt turn the central bolt (it is specified by an arrow) tension roller clockwise.