Foltsvagen Golf 4
+ 1. Maintenance instruction
- 2. Engine
- 2.1. Petrol engines
2.1.1. Technical characteristics
2.1.2. Removal and installation of the bottom mudguard of a motor compartment
+ 2.1.3. Engine 1,6-/1,8-I
+ 2.1.4. Engine 1,4-I
+ 2.1.5. The engine 2,3 - I-VR5
2.1.6. Compression check in engine cylinders
- 2.1.7. Removal and installation of a poliklinovy belt
- 2.1.7.1. Engines 1,6-/1,8-I
2.1.7.1.1. Removal
2.1.7.1.2. Installation
+ 2.1.7.2. Engine 1,4-I
+ 2.1.7.3. Engine 2,3-I
+ 2.1.8. Recommendations about engine oils
+ 2.1.9. Circulation of engine oil
2.1.10. Check of pressure of oil and sensor of pressure of oil
2.1.11. Removal and installation of the oil pallet
2.1.12. Engine start after major maintenance
2.1.13. Diagnostics of malfunctions of the engine
2.1.14. Main malfunctions of system of greasing
+ 2.2. Diesel engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes
|
Arrangement of a poliklinovy belt on models without air central air
Arrangement of a poliklinovy belt on models with air central air
| PERFORMANCE ORDER |
| 1. If the belt is repeatedly established, using a marker or paint, an arrow note the direction of its rotation. |
|
|
2. Weaken a tension of a poliklinovy belt. For this purpose turn the mechanism of a tension of a poliklinovy belt a key clockwise. |
|
|
3. In this provision of a tension roller even or a drill shaft in diameter of 4,5 mm in length of 55 mm fix the mechanism of a tension of a poliklinovy belt. |
| 4. Remove poliklinovy a belt. |
|
|
|
