VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation


Foltsvagen Golf 4
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. Petrol engines
      2.1.1. Technical characteristics
      2.1.2. Removal and installation of the bottom mudguard of a motor compartment
      + 2.1.3. Engine 1,6-/1,8-I
      + 2.1.4. Engine 1,4-I
      + 2.1.5. The engine 2,3 - I-VR5
      2.1.6. Compression check in engine cylinders
      - 2.1.7. Removal and installation of a poliklinovy belt
         + 2.1.7.1. Engines 1,6-/1,8-I
         + 2.1.7.2. Engine 1,4-I
         - 2.1.7.3. Engine 2,3-I
            2.1.7.3.1. Removal
            2.1.7.3.2. Installation
      + 2.1.8. Recommendations about engine oils
      + 2.1.9. Circulation of engine oil
      2.1.10. Check of pressure of oil and sensor of pressure of oil
      2.1.11. Removal and installation of the oil pallet
      2.1.12. Engine start after major maintenance
      2.1.13. Diagnostics of malfunctions of the engine
      2.1.14. Main malfunctions of system of greasing
   + 2.2. Diesel engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes





2.1.7.3. Engine 2,3-I

2.1.7.3.1. Removal
PERFORMANCE ORDER
1. Remove the bottom mudguard of a motor compartment.
2. If the belt is repeatedly established, using a marker or paint, note the direction of rotation of a belt.
3. Weaken a tension of a poliklinovy belt. For this purpose, using a wrench on 16 mm, turn the mechanism of a tension of a belt counter-clockwise.
4. In this situation fix the mechanism of a tension of a poliklinovy belt even in diameter of 6 mm.
5. Remove poliklinovy a belt.