VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
- 1. Maintenance instruction
   + 1.1. Governing bodies, devices and equipment
   + 1.2. Weekly checks and service in a way
   - 1.3. Maintenance
      1.3.1. Technical characteristics
      1.3.2. Periodicity of service
      + 1.3.3. Maintenance regulations
      + 1.3.4. Engine oil
      + 1.3.5. Replacement of oil and oil filter
      1.3.6. Check of an exhaust system
      + 1.3.7. System of cooling of the engine
      1.3.8. Replacement of a filtering element of the air filter
      1.3.9. Check of a condition of a poliklinovy belt
      + 1.3.10. Spark plugs
      1.3.11. Replacement of the fuel filter (diesel engines)
      1.3.12. Check of tightness of hoses and liquid effluence
      1.3.13. Maple belts
      1.3.14. Measurement of wear of gear belts on diesel engines
      - 1.3.15. Box of transfers / main transfer
         1.3.15.1. Check of a protective cover of a power shaft
         1.3.15.2. Visual check of tightness of a transmission
         1.3.15.3. Check of level of oil in a mechanical transmission
         1.3.15.4. Check of level of oil in the main transfer of AKPP
         1.3.15.5. Check / replacement of level of oil in an automatic transmission
      + 1.3.16. Check of a forward suspension bracket and steering
      1.3.17. Shock-absorber check
      1.3.18. Radiator check
      1.3.19. Electroconducting check
      1.3.20. Check of level of liquid in the amplifier of a steering
      + 1.3.21. Brake liquid
      1.3.22. Check of forward brake shoes
      1.3.23. Check of back brake shoes of disk brakes
      1.3.24. Check of back brake shoes of drum-type brakes
      1.3.25. Check of brake hoses
      1.3.26. Check of cables of the hand brake
      1.3.27. Check of a condition of seat belts
      1.3.28. Safety cushions
      1.3.29. Hinges of doors
      1.3.30. Replacement of the dust filter
      + 1.3.31. Storage battery
      + 1.3.32. Stekloomyvateli
      1.3.33. Brushes of screen wipers
      1.3.34. Check of a starting position of the lever of a screen wiper
      1.3.35. Battery replacement in a key of remote control
      1.3.36. Service-indicator zeroing
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes










1.3.15.3. Check of level of oil in a mechanical transmission

GENERAL INFORMATION

Arrangement of a maslozalivny stopper of a transmission on models with engines 1,4/1,6-I

Arrangement of a maslozalivny stopper of a transmission on models with engines 1,8/2,3-I

Oil in a mechanical box should not be changed.

For weakening of a carving stopper of a maslozalivny opening it is necessary to use a natural a face head of 17 mm.

For a dolivka it is necessary to use G50 specification SAE 75W90 oil.

PERFORMANCE ORDER
1. Establish the car on the lift in horizontal situation.
2. Remove the bottom mudguard of the engine.
3. Unscrew a maslonalivny stopper from a transmission which is located before the left power shaft.
4. Check oil level. Oil level correct when it is on the bottom edge of a carving opening.
5. If necessary add oil through a maslonalivny opening.
6. Screw up a stopper of a maslonalivny opening and tighten it the moment of 25 Nanometers.

Prevention

The case of a transmission can be made of an aluminum or magnesian alloy. If the new carving stopper of a maslonalivny opening is established, it should be picked up for number for the corresponding transmission as jams have a various covering. If to use an inappropriate stopper, there can be a contact corrosion.