VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation


Foltsvagen Golf 4
- 1. Maintenance instruction
   + 1.1. Governing bodies, devices and equipment
   + 1.2. Weekly checks and service in a way
   - 1.3. Maintenance
      1.3.1. Technical characteristics
      1.3.2. Periodicity of service
      + 1.3.3. Maintenance regulations
      + 1.3.4. Engine oil
      + 1.3.5. Replacement of oil and oil filter
      1.3.6. Check of an exhaust system
      + 1.3.7. System of cooling of the engine
      1.3.8. Replacement of a filtering element of the air filter
      1.3.9. Check of a condition of a poliklinovy belt
      + 1.3.10. Spark plugs
      1.3.11. Replacement of the fuel filter (diesel engines)
      1.3.12. Check of tightness of hoses and liquid effluence
      1.3.13. Maple belts
      1.3.14. Measurement of wear of gear belts on diesel engines
      + 1.3.15. Box of transfers / main transfer
      + 1.3.16. Check of a forward suspension bracket and steering
      1.3.17. Shock-absorber check
      1.3.18. Radiator check
      1.3.19. Electroconducting check
      1.3.20. Check of level of liquid in the amplifier of a steering
      + 1.3.21. Brake liquid
      1.3.22. Check of forward brake shoes
      1.3.23. Check of back brake shoes of disk brakes
      1.3.24. Check of back brake shoes of drum-type brakes
      1.3.25. Check of brake hoses
      1.3.26. Check of cables of the hand brake
      1.3.27. Check of a condition of seat belts
      1.3.28. Safety cushions
      1.3.29. Hinges of doors
      1.3.30. Replacement of the dust filter
      + 1.3.31. Storage battery
      + 1.3.32. Stekloomyvateli
      1.3.33. Brushes of screen wipers
      1.3.34. Check of a starting position of the lever of a screen wiper
      1.3.35. Battery replacement in a key of remote control
      1.3.36. Service-indicator zeroing
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes





1.3.34. Check of a starting position of the lever of a screen wiper
GENERAL INFORMATION

Starting position of a brush of a screen wiper of a windscreen

A=20-30 mm

Starting position of a brush of a screen wiper of back glass

 а=25 mm

Check and adjustment of a tilt angle of the lever of a screen wiper

1–wrench;

2–screen wiper lever;

3–VW 3358 tool

PERFORMANCE ORDER
1. Switch on and off screen wipers, thus they will be established in a starting position.
2. Check distance between a rubber tape of a brush of a screen wiper and the basis of glass which 20–30 mm on a windscreen and 25 mm on back glass (see fig. should be. Starting position of a brush of a screen wiper of a windscreen and fig. Starting position of a brush of a screen wiper of back glass).

Check of a tilt angle of the lever of a screen wiper

PERFORMANCE ORDER
Prevention

Check of a tilt angle of the lever of a screen wiper is necessary for making at low efficiency of purification of glass or when there is a noise at work of brushes.
1. Switch on and off screen wipers, thus levers of a screen wiper will be established in a starting position. Remove screen wiper brushes.
2. The lever of a screen wiper (1) insert into the HAZET 4851-1 or VW 3358 tool and fix a bolt (see fig. Check and adjustment of a tilt angle of the lever of a screen wiper).
3. In need of adjustment, being careful, a wrench (1) turn the VW 3358 tool until the arrow will not be established on a scale on demanded value ± 2 °.
4. Remove the VW 3358 tool, establish and fix screen wiper brushes.

Nominal rates of corners

From the driver
- 8,5 °
From the passenger
- 1 °
Back glass
0 °