since 1997 of release

Repair and car operation

Foltsvagen Golf 4
- 1. Maintenance instruction
   + 1.1. Governing bodies, devices and equipment
   + 1.2. Weekly checks and service in a way
   - 1.3. Maintenance
      1.3.1. Technical characteristics
      1.3.2. Periodicity of service
      + 1.3.3. Maintenance regulations
      + 1.3.4. Engine oil
      + 1.3.5. Replacement of oil and oil filter
      1.3.6. Check of an exhaust system
      + 1.3.7. System of cooling of the engine
      1.3.8. Replacement of a filtering element of the air filter
      1.3.9. Check of a condition of a poliklinovy belt
      + 1.3.10. Spark plugs
      1.3.11. Replacement of the fuel filter (diesel engines)
      1.3.12. Check of tightness of hoses and liquid effluence
      1.3.13. Maple belts
      1.3.14. Measurement of wear of gear belts on diesel engines
      + 1.3.15. Box of transfers / main transfer
      + 1.3.16. Check of a forward suspension bracket and steering
      1.3.17. Shock-absorber check
      1.3.18. Radiator check
      1.3.19. Electroconducting check
      1.3.20. Check of level of liquid in the amplifier of a steering
      - 1.3.21. Brake liquid Check of level of brake liquid Replacement of brake liquid
      1.3.22. Check of forward brake shoes
      1.3.23. Check of back brake shoes of disk brakes
      1.3.24. Check of back brake shoes of drum-type brakes
      1.3.25. Check of brake hoses
      1.3.26. Check of cables of the hand brake
      1.3.27. Check of a condition of seat belts
      1.3.28. Safety cushions
      1.3.29. Hinges of doors
      1.3.30. Replacement of the dust filter
      + 1.3.31. Storage battery
      + 1.3.32. Stekloomyvateli
      1.3.33. Brushes of screen wipers
      1.3.34. Check of a starting position of the lever of a screen wiper
      1.3.35. Battery replacement in a key of remote control
      1.3.36. Service-indicator zeroing
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes Replacement of brake liquid


Arrangement of the union of pumping of a brake support

The union of pumping of a brake support is specified by an arrow.

Wrench use for weakening of the union of pumping



Old brake liquid has more dark color, than new.

It is necessary to have 1,5 liters of more freshly brake DOT 4 liquid.

Operation on replacement of brake liquid is similar to operation of pumping of brakes except that the tank of brake liquid should be released from old brake liquid.

1. Open the first union of pumping and swing a brake pedal until old brake liquid leaves the main brake cylinder.
2. Add brake liquid to MAX label in a tank and pump over once again before emergence in the union of pumping of new brake liquid then screw up the pumping union.
3. Similarly pump over brake contours of other wheels (see fig. Arrangement of the union of pumping of a brake support and fig. Wrench use for weakening of the union of pumping).
4. At carrying out pumping do not allow lowering of level of brake liquid in a tank below MIN label. Otherwise air can get to hydraulic brake system.
5. Check reliability of a tightening of unions of pumping, establish on them dustproof caps and wipe traces of brake liquid.
6. Check action of brake system at car movement on small speed.