After ignition inclusion installation starts to work usually in an automatic mode. In fields of indication there are indications 2, 3, 7 and 8 (see fig. Governing bodies climatic Klimatronik installation).
Installation completely automatically maintains the set temperature in the car. For this purpose the temperature of air submitted to salon, frequency of rotation of the fan (amount of submitted air) and distribution of submitted air automatically change.
Automatic correction of work of installation when strengthening solar radiation therefore any manual readjusting of heating is excessive is provided.
If before switching off of ignition some deviations from standard parameters of an automatic operating mode of the installation were entered, again set parameters are remembered by installation for a long time. Only in 20 minutes after switching off of ignition earlier set mode of a retsirkulyatsiya is erased from memory.
Switching from Celsius system in Fahrenheit system and on the contrary
Press and keep in the pressed situation a key 17, then press a key 9.
On the display there will be a measured size of temperature in the relevant system.
|