VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   + 13.15. Doors
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   - 13.32. Stekloomyvateli and screen wipers
      13.32.1. Replacement of rubber tapes of brushes of screen wipers
      13.32.2. Adjustment snuffled a windscreen washer
      13.32.3. Removal and installation snuffled windscreen washers
      13.32.4. Removal and installation snuffled a washer of back glass
      13.32.5. Removal and installation of levers of a screen wiper
      13.32.6. Removal and installation of the engine of a screen wiper of a windscreen
      13.32.7. Removal and installation of tanks and washer pump
      13.32.8. Removal and installation of the engine of a screen wiper of back glass
+ 14. Electric equipment and electroschemes










13.32.8. Removal and installation of the engine of a screen wiper of back glass

GENERAL INFORMATION

Screen wiper of back glass


1–folding casing;
2–nut, 15 Nanometers;
3–screen wiper lever;
4–sealing plug;
5–washer nozzles;
6–sealing ring;
7–screen wiper engine;
8–nut, 8 Nanometers;
9–Dempfiruyushchy ring;
10-rasporny plug;
11-screen wiper brush

Removal

PERFORMANCE ORDER
1. Move up a folding casing in the basis of the lever of a screen wiper and on some turns unscrew a nut of fastening of the lever of a screen wiper. Moving the screen wiper lever to the parties, weaken its landing to axes, then unscrew a nut and remove the screen wiper lever.
2. Remove an internal upholstery of a back door.
3. Disconnect from the screen wiper engine the electric socket (1) and a hose (2) supply of liquid to a washer (bolts of fastening of a back screen wiper are shown by shooters).
4. Unscrew nuts of fastening of the engine of a screen wiper and remove it.

Installation

PERFORMANCE ORDER
1. Establish the sealing plug in an opening of back glass (it is shown by an arrow). Being careful, establish the screen wiper engine on a place and fix it nuts.
2. Further installation is made in sequence, return to removal.
3. Tighten nuts of fastening of the engine of a screen wiper the moment of 8 Nanometers.
4. Tighten a nut of fastening of the lever of a screen wiper the moment of 15 Nanometers.
5. Establish the screen wiper lever so that the distance (and) between a brush of a screen wiper and the bottom edge of back glass made 25 mm.