VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   + 13.15. Doors
   + 13.16. Hatch
   13.17. Gutter cleaning
   - 13.18. Mirrors
      13.18.1. Removal and installation of an external mirror of back type / glass of a mirror
      13.18.2. Removal of the case of an external mirror
      13.18.3. Removal and installation of an internal rear-view mirror
      13.18.4. Removal and rear-view mirror installation with the rain sensor
      13.18.5. Automatic blackout of an internal rear-view mirror
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes





13.18.4. Removal and rear-view mirror installation with the rain sensor

GENERAL INFORMATION

Internal rear-view mirror with the rain sensor

1–casing;

2–mirror support;

3–electric sockets;

4–mirror arm;

5–casing;

6–mirror

The sensor of a rain is located in the rear-view mirror basis. After the rain beginning the sensor automatically includes windscreen screen wipers. The precondition of automatic inclusion of a screen wiper is that screen wipers should be included in a faltering mode.

The sensor of a rain shines a windscreen with a light-emitting diode. At dry glass the beam of a light-emitting diode is reflected from a surface of glass and fixed by the photo diode. If the windscreen crude, a ray of light is reflected to a lesser extent. Light reflection depends on a windscreen at most a rain.

Removal

PERFORMANCE ORDER
1. Separate from each other casings (1 and 5) the bases of a rear-view mirror and remove them.
2. Take the electric socket (4) of an arm of a mirror (3) and disunite it.
3. Moving down, disconnect a mirror arm from a support.

Installation

Installation is made in sequence, return to removal.