| 1. Adjustment of a starting position of the hatch is necessary for making, if the mechanism of a drive of the hatch does not stop in a starting position or if the hatch opened manually. For adjustment it is necessary to remove the mechanism of a drive of the hatch. |
| 2. Remove a weight wire from the accumulator. |
| 3. Connect the electric socket to the engine of the mechanism of a drive of the hatch. |
| 4. Press the switch of preliminary control therefore the mode of closing of the hatch will be included. |
| 5. Extend the switch of preliminary control therefore the mode of closing of the hatch will be included. |
| 6. Turn the rotary switch of preliminary control in situation "the hatch it is open". |
| 7. Turn the rotary switch of preliminary control in situation "the hatch it is closed". As a result of it the engine will automatically be established in a starting position and will be switched off. |
| 8. In this situation establish the engine of the mechanism of a drive of the hatch. Besides, disconnect the electric socket from the engine and remove a weight wire from the accumulator. |
