VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   + 13.11. Cowl
   - 13.12. Cowl lock
      13.12.1. Removal and installation
      13.12.2. Removal and installation of the handle of opening of the lock of a cowl
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   + 13.15. Doors
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes




13.12.2. Removal and installation of the handle of opening of the lock of a cowl

Removal

PERFORMANCE ORDER
1. Pull approximately on 2 cm the handle of opening of the lock of a cowl (And – the handle of opening of a cowl, In – a spring clip, With – facing).
2. Establish an edge of a thin screw-driver in a gap between the lever of opening of a cowl and a spring clip (In).
3. Release the handle of opening of a cowl, thus a spring clip will act in film from the handle.

Prevention

The spring clip at removal falls for lateral furnish in deepening for feet of the driver.


4. Release lateral furnish from spring clips, at first in a bottom corner of a forward rack, then a spring clip in the top part.

Installation

PERFORMANCE ORDER
1. Fix spring clips lateral furnish in deepening for feet of the driver.
2. First of all fix furnish in the lower part of a forward rack, then the top part of lateral furnish to an arm.
3. Establish a spring clip on the lever of opening of a cowl.
4. Establish the lever of opening of a cowl on an arm.

Prevention

Before closing of a cowl check operability of the lever of opening of a cowl and a cable of opening of the lock of a cowl.