VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Forward panel of a body
   13.6. Removal and installation of a front bumper
   13.7. Removal and installation of a rear bumper
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation of facing of a niche of a forward wing
   13.10. Removal and installation of facing of a niche of a back wing
   - 13.11. Cowl
      13.11.1. Removal
      13.11.2. Installation
      13.11.3. Adjustment of provision of a cowl
   + 13.12. Cowl lock
   13.13. Removal and front grille installation
   13.14. Removal and installation of a lateral overlay of a body
   + 13.15. Doors
   + 13.16. Hatch
   13.17. Gutter cleaning
   + 13.18. Mirrors
   + 13.19. Central console
   13.20. Removal and installation of the top furnish in space for feet of the driver
   13.21. Removal and installation of a ware box
   13.22. Removal and installation of a lateral covering of space for feet
   13.23. Removal and installation of overlays of thresholds
   13.24. Removal and installation of the bottom facing of the central rack
   13.25. Removal and installation of the right lateral covering of a luggage compartment
   13.26. Removal and installation of a covering of a floor of a luggage compartment
   13.27. Removal and installation of back furnish of a luggage compartment
   13.28. Removal and installation of a forward seat
   13.29. Lateral safety cushions
   13.30. Removal of a pillow of a back many-placed seat
   13.31. Removal and installation of a back of a back seat
   + 13.32. Stekloomyvateli and screen wipers
+ 14. Electric equipment and electroschemes










13.11.3. Adjustment of provision of a cowl

PERFORMANCE ORDER
1. Unscrew bolts (are specified by shooters), (1) cowl fixing the lock.
2. Close a cowl and check its arrangement of rather adjacent surfaces.
3. Adjust the provision of a cowl so that at the closed cowl the gap on perimeter of a cowl was identical from all directions.
4. For adjustment weaken bolts of fastening of hinges of a cowl and, moving a cowl, adjust its situation.
5. After adjustment tighten bolts of fastening of hinges of a cowl the moment of 20 Nanometers.
6. Adjustment of height of installation of a cowl make rotation of rubber buffers (2) (see fig. Elements of fastening of a cowl).
7. Tighten bolts of fastening of the lock of a cowl the moment of 20 Nanometers.