VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation


Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
- 4. Fuel system
   - 4.1. Cars with petrol engines
      4.1.1. Removal and installation of the fuel pump / fuel level sensor
      4.1.2. Removal and installation of the fuel filter (petrol engines)
      4.1.3. Adjustment of a cable of an accelerator
      4.1.4. Removal and installation of the case of the air filter
      4.1.5. Remote check of elements of fuel system
      + 4.1.6. Check of the fuel pump
      4.1.7. Check of the relay of the fuel pump
      + 4.1.8. Control system of the engine
   + 4.2. Cars with diesel engines
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes





4.1.7. Check of the relay of the fuel pump
GENERAL INFORMATION

Arrangement of safety locks on the main block of safety locks


Arrangement of the relay of the fuel pump on the relay block under the dashboard from the driver


The relay of the fuel pump is located in the relay block under a combination of devices from the driver.

PERFORMANCE ORDER
1. Take the fuse No. 28 for the fuel pump from the block of safety locks.
2. Connect a light-emitting diode sampler between weight and one of fuse contacts.
3. Remove the top furnish in deepening for feet of the driver.
4. Include a starter. Thus should join with click of the relay of the fuel pump. The light-emitting diode sampler Besides, should burn.
5. If the relay does not turn on, check an electric chain of the relay.
6. If the light-emitting diode sampler does not burn, but the relay works, connect a light-emitting diode sampler to other contact of the fuse.
7. If the light-emitting diode sampler still does not burn, connect an additional wire contact of 23 relays of the fuel pump and fuse contact.
8. If the fuel pump starts to work, means, the relay is faulty and it is necessary to replace it.