VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
- 4. Fuel system
   - 4.1. Cars with petrol engines
      4.1.1. Removal and installation of the fuel pump / fuel level sensor
      4.1.2. Removal and installation of the fuel filter (petrol engines)
      4.1.3. Adjustment of a cable of an accelerator
      4.1.4. Removal and installation of the case of the air filter
      4.1.5. Remote check of elements of fuel system
      + 4.1.6. Check of the fuel pump
      4.1.7. Check of the relay of the fuel pump
      + 4.1.8. Control system of the engine
   + 4.2. Cars with diesel engines
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes



4.1.4. Removal and installation of the case of the air filter

GENERAL INFORMATION

ENGINES 1,6-/1,8-/2,3-I

The air filter on cars with engines 1,6-/1,8-/2,3-I



1–air inlet branch pipe;

2–electric socket;

4, 5 – a bolt

PERFORMANCE ORDER
1. Disconnect a branch pipe of an air inlet (1) and the electric socket (2) from an air flowmeter.
2. Unscrew bolts (4 and 5) and remove the case of the air filter.
3. Installation is made in sequence, return to removal.

ENGINE 1,4-I

The air filter of cars with engines 1,4-I



Screws of fastening are shown by shooters.

1–cap;

2–accelerator cable;

3–hose of ventilation of a case;

4–air inlet of warmed-up air


PERFORMANCE ORDER
1. Using a screw-driver edge, remove a cap (1) closing the screw.
2. Release spring clamps and disconnect an accelerator cable from the case of the air filter.
3. Disconnect a hose of ventilation of a case from the top part of the case of the air filter.
4. Disconnect a hose of supply of warmed-up air.
5. Unscrew screws and remove the case of the air filter.
6. Installation is made in sequence, return to removal.