VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. Petrol engines
      2.1.1. Technical characteristics
      2.1.2. Removal and installation of the bottom mudguard of a motor compartment
      + 2.1.3. Engine 1,6-/1,8-I
      + 2.1.4. Engine 1,4-I
      + 2.1.5. The engine 2,3 - I-VR5
      2.1.6. Compression check in engine cylinders
      + 2.1.7. Removal and installation of a poliklinovy belt
      - 2.1.8. Recommendations about engine oils
         2.1.8.1. Viscosity of oil
         2.1.8.2. All-weather oils
         2.1.8.3. Oil with the increased lubricant properties
         2.1.8.4. Classes of viscosity and range of use of oil
         2.1.8.5. Engine oils
      + 2.1.9. Circulation of engine oil
      2.1.10. Check of pressure of oil and sensor of pressure of oil
      2.1.11. Removal and installation of the oil pallet
      2.1.12. Engine start after major maintenance
      2.1.13. Diagnostics of malfunctions of the engine
      2.1.14. Main malfunctions of system of greasing
   + 2.2. Diesel engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes










2.1.8.4. Classes of viscosity and range of use of oil

GENERAL INFORMATION

As a range of use of the next classes SAE are blocked, it is possible not to pay attention to short-term temperature fluctuations. Mixing of oils of various classes of viscosity if the oil dolivka is required is allowed, and the surrounding temperature any more does not correspond to a class of viscosity of oil filled in in the engine.

At long external temperatures below-20 ° With it is recommended to fill in SAE 5W-20 oil.


Prevention

CDs engine oils which the producer designates as oil for diesel engines, are unsuitable for petrol engines. There are the oils which application is possible in two types of engines, in this case both designations are pointed to capacities with oil, for example SG/CD.

Additional additives, irrespective of their look and appointment, should not be added in oil.