since 1997 of release

Repair and car operation

Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
- 12. Brake system
   12.1. Technical characteristics
   + 12.2. ABS/EBV/EDS/ASR/MSR
   + 12.3. Replacement of forward brake shoes on FS-III support
   + 12.4. Replacement of brake shoes on FN-3 support
   + 12.5. Replacement of back brake shoes on disk brakes
   + 12.6. Brake disk
   12.7. Adjustment of the hand brake
   + 12.8. Replacement of back brake shoes on drum-type brakes
   12.9. Removal and installation of the back working brake cylinder
   - 12.10. Pumping of hydraulic brake system
      12.10.1. Pumping – the main method (two persons)
      12.10.2. Pumping – set use with the unidirectional valve
      12.10.3. Pumping – use of a set of pumping under pressure
      12.10.4. All methods
   12.11. Brake pipelines and hoses
   12.12. Check of the vacuum amplifier of brakes
   12.13. Removal, installation and adjustment of the switch of a stoplight
   12.14. Removal and installation of cables of the hand brake
   12.15. Main malfunctions of brakes
+ 13. Body
+ 14. Electric equipment and electroschemes

12.10.4. All methods

1. After completion of process of pumping strongly press a brake pedal, thus it should pass about a half of the course.
2. Wash away all traces of the spilled brake liquid and tighten unions of pumping the demanded moment, then establish on them dustproof caps.
3. Check level of brake liquid in a popolnitelny tank of brake system and, if necessary, add brake liquid.
4. Remote brake liquid should not be used more. Pure brake liquid should be stored in a tight vessel as it is very hygroscopic that lowers temperature of boiling and worsens technical characteristics of brake liquid.