VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
- 4. Fuel system
   + 4.1. Cars with petrol engines
   - 4.2. Cars with diesel engines
      4.2.1. Direct injection of fuel
      4.2.2. Fuel tank
      4.2.3. Specifications
      4.2.4. Check of system of preliminary heating of the diesel engine
      4.2.5. Check of candles of an incandescence
      4.2.6. Removal and installation of candles of an incandescence
      4.2.7. System of heating of fuel
      - 4.2.8. Fuel nozzles
         4.2.8.1. Removal and installation
      4.2.9. Moment of injection of the fuel pump of a high pressure
      4.2.10. Main malfunctions of a control system of the engine
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes




4.2.8.1. Removal and installation

GENERAL INFORMATION

Prevention

At work with fuel nozzles observe purity.


Removal

PERFORMANCE ORDER
1. Clear area about fuel nozzles and connecting nuts топливопроводов.
2. Unscrew connecting nuts and remove топливопроводы a high pressure in a set.
3. Unscrew holders of fuel nozzles and remove fuel nozzles from the engine.
4. For extraction of fuel nozzles it is possible to use an inertial hammer or the special VW3364 tool.
5. Remove a thermoprotective sealing ring.

Installation

PERFORMANCE ORDER
1. At installation of fuel nozzles it is necessary to use a new thermoprotective sealing ring. It is necessary to establish a ring so that the konusny party was directed up (the arrow shows the direction to a head of the block of cylinders).
2. Establish fuel nozzles.
3. Establish the holder of a fuel nozzle, thus observe correctness of an arrangement of an arm on a support.
4. Screw in a bolt with a spherical washer and tighten it the moment of 2 Nanometers.
5. Establish топливопроводы a high pressure and screw connecting nuts, having tightened them the moment of 25 Nanometers.