| 1. Screw in a glow plug and tighten it the moment of 15 Nanometers. |
|
2. Do not exceed the moment of a tightening of a glow plug, otherwise it will be reduced or absolutely ring gap between a working and carving part of a glow plug will be closed. The normal amount of a ring gap makes 0,5 mm. Reduction of a ring gap leads to a fast exit of a glow plug out of operation (1 – glow plugs with a normal ring gap, 2 – without a ring gap). |
| 3. Connect to glow plugs electric wires. |
|
