VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
- 2. Engine
   + 2.1. Petrol engines
   - 2.2. Diesel engines
      2.2.1. Technical characteristics
      2.2.2. Bottom mudguard of a motor compartment
      2.2.3. Removal and installation of the power unit
      - 2.2.4. Gear belt
         2.2.4.1. Removal
         2.2.4.2. Installation of the piston of the first cylinder in VMT
         2.2.4.3. Installation
         2.2.4.4. Check of a tension roller of a gear belt
         2.2.4.5. Removal and installation of a head of the block of cylinders
      2.2.5. Removal and installation of an inlet collector of the diesel SDI engine
      2.2.6. Compression check in engine cylinders
      2.2.7. Removal and installation of a poliklinovy belt
      2.2.8. Recommendations about engine oils
      2.2.9. Circulation of engine oil
      2.2.10. Check of pressure of oil and sensor of pressure of oil
      2.2.11. Removal and installation of the oil pallet
      2.2.12. Diagnostics of malfunctions of the diesel engine
      2.2.13. Main malfunctions of system of greasing
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes




2.2.4.4. Check of a tension roller of a gear belt

PERFORMANCE ORDER
1. Remove the top casing of a gear belt.
2. Strongly press a gear belt (shooter) and take away it from a tension roller.
3. Release a gear belt, thus a tension roller it should be established in former situation.
4. In case the tension of a gear belt changed, it is necessary to check the moment of injection of the fuel pump of a high pressure.
5. Establish the top casing of a gear belt.