VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation

Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
- 9. Suspension brackets and power shafts
   - 9.1. Forward suspension bracket
      + 9.1.1. Amortization rack
      + 9.1.2. Shock-absorber and spring
      9.1.3. Removal and installation of a power shaft
      9.1.4. Replacement of protective covers of a power shaft
      9.1.5. Assembly provision of tarelchaty springs
      9.1.6. CV JOINT filling with VW-G000603 greasing
      9.1.7. Filling of external hinges with VW-G000603 greasing
      9.1.8. Filling with greasing of the internal tripoidny hinge
      9.1.9. Malfunctions of power shafts
   + 9.2. Back suspension bracket
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes

9.1.5. Assembly provision of tarelchaty springs

GENERAL INFORMATION

Installation of a tarelchaty spring of the internal hinge

At installation of a tarelchaty spring (1) internal hinge bigger diameter should be directed outside.

Installation of a tarelchaty spring of the external hinge

The Tarelchaty spring (1) external hinge should be directed in big diameter outside of, and the persistent ring (2) smaller diameter should be directed outside.

PERFORMANCE ORDER

1. For greasing of hinges it is necessary to use G000603 greasing. A half of greasing is necessary for enclosing in a protective cover, and the second half in the hinge.
	2. For fastening of collars use of the tool 1847 is necessary. Sponges of the tool establish on corners of a clip of a collar and in this situation tighten sponges the screw (And – the screw of a tightening of sponges of the tool, In – installation of sponges of the tool on a collar).