VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
- 7. Coupling
   + 7.1. Coupling disk
   - 7.2. A coupling disk on cars with engines 1,4 and 1,6-I
      7.2.1. Removal
      7.2.2. Check
      7.2.3. Installation
   + 7.3. Air removal from a hydraulic drive of coupling
   7.4. Main malfunctions of coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes










7.2.2. Check

PERFORMANCE ORDER
1. Check reliability of zaklepochny connections in a press disk. Press with damaged or absent rivets it is necessary to replace a disk.
2. Check press a disk on lack of cracks, пригара and wear of a surface. Using a steel ruler and an edge щупа, check not planeness of a working surface of a press disk. Not planeness of a press disk should not exceed 0,2 mm.
3. Check a condition of a surface of a friction of a flywheel on lack of cracks, пригара and wear of a surface.
4. Check a condition of frictional overlays of a disk of coupling and in the presence of oil traces on them and mechanical damages replace a coupling disk.
5. Faulty vyzhimny it is possible to define the bearing, without removing it from the car for what it is necessary to press a coupling pedal on the working engine. If by pressing of a pedal of coupling there is an additional noise, means, vyzhimny the bearing is faulty and it is necessary to replace it.