Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
- 7. Coupling
- 7.1. Coupling disk
+ 7.2. A coupling disk on cars with engines 1,4 and 1,6-I
+ 7.3. Air removal from a hydraulic drive of coupling
7.4. Main malfunctions of coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes
Use of adaptations at removal and installation of a disk of coupling
At work of coupling the dust which contains asbestos is formed, unhealthy therefore when cleaning coupling do not use the compressed air and do not inhale a dust. Cleaning of details of coupling of a dust make with use of brake liquid or methyl alcohol. After cleaning of details of coupling with use of methyl alcohol or brake liquid wipe details dry.
| PERFORMANCE ORDER
| 1. Remove a transmission.
| 2. Note the provision of leading knot of coupling in relation to a flywheel, using a marker or paint.
| 3. Using the special VW-3067 tool or a screw-driver, for teeths of a gear wreath of a flywheel block a flywheel from a provorachivaniye.
|4. Gradually in diagonal sequence weaken bolts of fastening of leading knot of coupling, turning each bolt on a turn half until it will be terminated springs and bolts can be unscrewed manually.
|5. Remove press a disk, thus support a coupling disk that it did not fall.
|6. Clear of dirt vyzhimny the bearing, but thus do not use solvents.
|7. Wipe a flywheel with gasoline use.