VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
- 1. Maintenance instruction
   + 1.1. Governing bodies, devices and equipment
   - 1.2. Weekly checks and service in a way
      1.2.1. Start from an external source (other car)
      1.2.2. If the engine is not started and the starter does not work
      1.2.3. If the engine is not started, even if the starter works normally
      1.2.4. Wheel replacement
      1.2.5. Towage
      1.2.6. Check of tightness of connections
      1.2.7. Places of weekly checks
      1.2.8. Check of level of engine oil
      1.2.9. Check of level of cooling liquid
      1.2.10. Check of brushes of a screen wiper
      1.2.11. Check of level of liquid of a stekloomyvatel
      1.2.12. Check of level of brake liquid
      1.2.13. Check of electric system
      1.2.14. Accumulator check
      1.2.15. Tires and pressure check in tires
      1.2.16. Identification data of the car
   + 1.3. Maintenance
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes







заказ билетов в театры москвы
Купить Bluetooth наушники там.



1.2.4. Wheel replacement

GENERAL INFORMATION

The spare wheel is located in a niche under a carpet of a luggage compartment and fixed by the holder.

PERFORMANCE ORDER
1. Remove a carpet over a spare wheel in a luggage compartment. Unscrew the holder of a spare wheel.
2. For safety enclose a spare wheel under the car about a poddomkrachivaniye place.
3. On the car standing on the earth, remove a cap of a wheel and on a half of a turn unscrew bolts of fastening of a wheel.
4. Establish a jack under a point of a poddomkrachivaniye of the car.
5. Rotating the jack handle clockwise, raise the car so that the wheel came off the earth. Completely unscrew bolts of fastening of a wheel and remove a wheel.
6. Establish a spare wheel and fix bolts, having tightened them it is insignificant. Lower a wheel. In diagonal sequence tighten bolts of fastening of a wheel the demanded moment.