VOLKSWAGEN GOLF IV

since 1997 of release

Repair and car operation



Foltsvagen Golf 4
- 1. Maintenance instruction
   + 1.1. Governing bodies, devices and equipment
   - 1.2. Weekly checks and service in a way
      1.2.1. Start from an external source (other car)
      1.2.2. If the engine is not started and the starter does not work
      1.2.3. If the engine is not started, even if the starter works normally
      1.2.4. Wheel replacement
      1.2.5. Towage
      1.2.6. Check of tightness of connections
      1.2.7. Places of weekly checks
      1.2.8. Check of level of engine oil
      1.2.9. Check of level of cooling liquid
      1.2.10. Check of brushes of a screen wiper
      1.2.11. Check of level of liquid of a stekloomyvatel
      1.2.12. Check of level of brake liquid
      1.2.13. Check of electric system
      1.2.14. Accumulator check
      1.2.15. Tires and pressure check in tires
      1.2.16. Identification data of the car
   + 1.3. Maintenance
+ 2. Engine
+ 3. Cooling system
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes




1.2.12. Check of level of brake liquid

GENERAL INFORMATION

Prevention

The brake liquid used in hydraulic system of coupling, is poisonous, therefore at its hit on skin it is necessary to wash out immediately this place a large amount of water.

If liquid got to eyes or in an organism, it is necessary to address immediately to the doctor.

Some liquids have property easily to ignite and can light up even from contact to hot knots of the car. Besides, the liquid used in hydraulic system of coupling, dissolves paint and plastic therefore at liquid hit on a paint and varnish covering of the car wash out it a plentiful quantity of water.

Also this liquid is hygroscopic, i.e. absorbs moisture from air and therefore the liquid, stored in open ware, it is not recommended to use a long time.


PERFORMANCE ORDER
1. Check that level of brake liquid is in a transparent tank between MIN and MAX labels.
2. If the dolivka of brake liquid is necessary, at first wipe area round a cover of a jellied mouth and unscrew a cover from a tank with brake liquid.
3. Check purity of a tank, and if necessary, merge brake liquid and clear a tank.
4. Add brake liquid to MAX label on a tank. Use only the ordered brake liquid as mixing of brake liquids is not allowed.