Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
- 3. Cooling system
3.1. Dolivka of cooling liquid
3.2. Structure of a mix of cooling liquid
- 3.3. Replacement of cooling liquid
3.3.1. Plums of cooling liquid
3.3.2. Filling of system of cooling
+ 3.4. Thermostat
+ 3.5. Radiator and radiator fan
+ 3.6. Water pump of petrol engines
+ 3.7. Water pump of diesel engines
3.8. Hoses of system of cooling
3.9. Malfunctions of system of cooling
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes
|
Prevention
When opening a cover of a broad tank on the hot engine it is necessary to be careful, as leaving pairs can lead to strong burns. For this purpose close a cover of a broad tank a thick layer of a fabric and slowly unscrew a cover before emergence of a hissing sound. After the hissing termination slowly unscrew and uncover a broad tank.
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and fix on supports. |
| 2. Remove the bottom mudguard of a motor compartment. |
| 3. Uncover a broad tank. |
| 4. Establish under a radiator the corresponding container. |
|
5. Unscrew the carving stopper closing a final opening (it is specified by an arrow). The stopper is located in the bottom hose of a radiator. |
| Engines 1,6-/1,8-/2,3-I |
|
6. Disconnect an additional hose (it is specified by an arrow) supply of cooling liquid to the oil heat exchanger. The oil heat exchanger is located in a flange of the oil filter. |
| Diesel engines |
|
7. Weaken a collar and disconnect an additional hose (it is specified by an arrow) supply of cooling liquid to the oil heat exchanger. The oil heat exchanger is located in a flange of the oil filter. |
|
|
|