since 1997 of release

Repair and car operation

Foltsvagen Golf 4
+ 1. Maintenance instruction
+ 2. Engine
- 3. Cooling system
   3.1. Dolivka of cooling liquid
   3.2. Structure of a mix of cooling liquid
   + 3.3. Replacement of cooling liquid
   + 3.4. Thermostat
   - 3.5. Radiator and radiator fan
      3.5.1. Removal
      3.5.2. Installation
   + 3.6. Water pump of petrol engines
   + 3.7. Water pump of diesel engines
   3.8. Hoses of system of cooling
   3.9. Malfunctions of system of cooling
+ 4. Fuel system
+ 5. Exhaust system
+ 6. Ventilation and heating system
+ 7. Coupling
+ 8. Transmission
+ 9. Suspension brackets and power shafts
+ 10. Steering
+ 11. Wheels and tires
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment and electroschemes

3.5. Radiator and radiator fan

3.5.1. Removal


Forward part of the car at radiator removal

1–bolts of fastening of a forward beam;
2–a bolt (not to unscrew completely);
3–bolts of fastening of a radiator;
4–bolts of fastening of the condenser


1. At the switched-off ignition remove a weight wire from the accumulator.
2. Remove the forward buffer.
3. Merge cooling liquid from cooling system.
4. Disconnect branch pipes of system of cooling from a radiator.
5. Disconnect electric sockets from a temperature-sensitive element and the radiator fan.
6. Unscrew the bolts (1), fixing a forward beam from two parties of the car.
7. Weaken, but do not unscrew completely the bolts (2) located over headlights.
8. Transfer to service situation the top forward cross-piece.
Cars with the conditioner
9. Do not disunite a contour of cooling of central air of air.
10. Unscrew the bolts, fixing the condenser to a forward beam. Without disconnecting from the condenser pipelines, move it aside and fix in this situation.
All cars
11. Unscrew four bolts of fastening of a radiator and take a radiator in a bottom of a motor compartment.